NEED A QUOTE

SUBMIT DRAWINGS

CONTACT US

Click to Scroll

FireSafe Plus

The system has a classification of E120 EW120 in accordance with BS EN 13501- 2:2007+A1:2009

Click to Scroll

FireSafe 240​

The system has a classification of E240 EW30 C0 Sa in accordance with BS EN 13501-2:2007+A1:2009.

Click to Scroll

ResQ-Window

The system has a classification of E120 EW30 C0 in accordance with BS EN 13501-2:2007+A1:2009.

Click to Scroll

SmokeSafe D120

CE Marked according to BS EN 12101- 1:2005+A1:2006 Annex ZA with
its AVCP by Warrington Certification Ltd.

FireSafe Plus

​

FireSafe PLUS provides the highest safety level of fire protection allowing a total gravity fail safe passage of escape both through and close by to the fire barrier. FireSafe PLUS is designed for all application types where a higher performance of radiation is required i.e. protecting a means of escape.

FireSafe Plus system remains hidden until required. Upon receiving a signal from the fire detection system or on loss of power the Operable Fire Barrier unwinds to its fire operational position under a gravity-controlled descent.

NEED A QUOTE

• Performance
• Application Types
• Headbox Sizing Chart
• Configuration
• Optional Extras

<

>

FireSafe Plus has a classification of E120 EW120 in accordance with BS EN 13501- 2:2007+A1:2009.
The system was subjected to 25 pre- conditioned cycles achieving a C0 classification in accordance with BS EN 14600:2005.
The system was subjected to a fire-resistance test achieving a performance level of 120 minutes to BS EN 1634-1:2014 in accordance with BS EN 1363-1:2012.
Radiation of less than 15kW/m2 was measured for a period up to 120 minutes to BS EN 1634-1:2014 in accordance with BS EN 1363-2:1999.

• Protected Main routes of Escape
• Elevator Doors
• Fire Compartmentation
• Smoke Compartmentation
• Escalators and Stair Protection
• Lobbies
• Smoke Channelling

Curtain Drop	Single Box Standard Size (WxH)
Up to 2.5m	180x180mm
2.5m to 4m	200x200mm
4m to 6.6m	210x240mm

Split Drop: 
An optional braking system is available to allow a stage descent during deployment. Partial descent to a predetermined level to permit preliminary escape and initial smoke containment, after delay the barrier descends to full operational position.
Delay on Alarm:
The system control can be programmed to allow a time delay on the alarm for a number of minutes before the barrier descends to its fire operational position.
Beam Sensor:
A beam sensor by itself can be used as either a block sensor or an override; when the fire alarm goes off and someone passes through the barrier the beam sensor can be wired to either stop the barrier in its tracks or to retract the barrier. Please note that when used in isolation the beam sensor does not trigger a sound.
Visual Alert System:
Flashing light and sirens are connected to the control panel and provide a warning when the barrier is about to descend. When the fire alarm is triggered and the fire barrier deploys the beacon will flash and a sounder alert until the signal from the alarm is lost. Please note that when used in isolation the audio visual unit does not stop the fire barrier descending or retract

FireSafe 240

The FireSafe 240 is an electrically operated Automatic Fire Barrier, to be used to form a barrier against fire.
FireSafe 240 system can be provided to opening widths of up to 30m and heights up to 6m utilising a multiple roller configuration.

NEED A QUOTE

• Performance
• Application Types
• Headbox Sizing Chart
• Configuration
• Optional Extras

<

>

FireSafe 240 has a classification of E240 EW30 C0 Sa in accordance with BS EN 13501-2:2007+A1:2009.
The system was subjected to 25 pre-conditioned cycles achieving a C0 classification in accordance with BS EN 14600:2005.
The system was subjected to a fire-resistance test achieving a performance level of over 240 minutes to BS EN 1634 1:2008 in accordance with BS EN 1363-1:1999.
Radiation of less than 15kW/m2 was measured for a period up to 41 minutes to BS EN 1634-1:2008 in accordance with BS EN 1363-2:1999.
The system was subjected to a smoke leakage test achieving an Sa classification to BS EN 1634-3:2004.

• Protected Main routes of Escape
• Elevator Doors
• Fire Compartmentation
• Smoke Compartmentation
• Escalators and Stair Protection
• Lobbies
• Smoke Channelling

Curtain Drop	Single Box Standard Size (WxH)	Double Box Over/Under Size (WxH)
Up to 2.5m	180x180mm	160x320mm
2.5m to 4m	200x200mm	180x360mm
4m to 6.6m	210x240mm	200x400mm

Split Drop: 
An optional braking system is available to allow a stage descent during deployment. Partial descent to a predetermined level to permit preliminary escape and initial smoke containment, after delay the barrier descends to full operational position.
Delay on Alarm:
The system control can be programmed to allow a time delay on the alarm for a number of minutes before the barrier descends to its fire operational position.
Beam Sensor:
A beam sensor by itself can be used as either a block sensor or an override; when the fire alarm goes off and someone passes through the barrier the beam sensor can be wired to either stop the barrier in its tracks or to retract the barrier. Please note that when used in isolation the beam sensor does not trigger a sound.
Visual Alert System:
Flashing light and sirens are connected to the control panel and provide a warning when the barrier is about to descend. When the fire alarm is triggered and the fire barrier deploys the beacon will flash and a sounder alert until the signal from the alarm is lost. Please note that when used in isolation the audio visual unit does not stop the fire barrier descending or retract

ResQ-Window

ResQ-Window is designed for doorways, corridors, lift shafts, areas of refuge and other areas where people and emergency services may need access.
The two transparent windows in the ResQ-Window Automatic Fire Barrier are positioned to allow a low and high-level ‘Safe View’ through the panels.
Firefighters will be able to see if there are survivors behind an Automatic Fire Barrier through the clear vision ‘Safe View’ panel to immediately assist their dynamic decision process.

NEED A QUOTE

• Performance
• Application Types
• Headbox Sizing Chart
• Optional Extras

<

>

The system has a classification of E120 EW30 C0 in accordance with BS EN 13501-2:2007+A1:2009. The system was subjected to 25 pre- conditioned cycles achieving a C0 classi cation in accordance with BS EN 14600:2005.
The system was subjected to a re- resistance test achieving a performance level of 120 minutes to BS EN 1634-1:2014 in accordance with BS EN 1363-1:2012.
Radiation of less than 15kW/m2 was measured for a period up to 34 minutes to BS EN 1634-1:2014 in accordance with BS EN 1363-2:1999.

• Doorways
• Lift shafts
  
• Elevator Doors
• Areas of refuge
• other areas where emergency services may need access
  

Curtain Drop	Single Box Standard Size (WxH)	Double Box Over/Under Size (WxH)
Up to 2.5m	180x180mm	160x320mm
2.5m to 4m	200x200mm	180x360mm
4m to 6.6m	210x240mm	200x400mm

Split Drop: 
An optional braking system is available to allow a stage descent during deployment. Partial descent to a predetermined level to permit preliminary escape and initial smoke containment, after delay the barrier descends to full operational position.
Delay on Alarm:
The system control can be programmed to allow a time delay on the alarm for a number of minutes before the barrier descends to its fire operational position.
Beam Sensor:
A beam sensor by itself can be used as either a block sensor or an override; when the fire alarm goes off and someone passes through the barrier the beam sensor can be wired to either stop the barrier in its tracks or to retract the barrier. Please note that when used in isolation the beam sensor does not trigger a sound.
Visual Alert System:
Flashing light and sirens are connected to the control panel and provide a warning when the barrier is about to descend. When the fire alarm is triggered and the fire barrier deploys the beacon will flash and a sounder alert until the signal from the alarm is lost. Please note that when used in isolation the audio visual unit does not stop the fire barrier descending or retract

SmokeSafe D120

The CE Marked SmokeSafe system is a smoke barrier without side guides and provides up to 120 minutes of smoke and heat protection. It is the most discreet operable fabric barrier available; designed to be installed in commercial properties such as shopping centres and airports, and channel smoke to a (SHEVS) Smoke Heat Exhaust Ventilation System.

NEED A QUOTE

• Performance
• Application Types
•  Headbox Sizing Chart
• Configuration
• Optional Extras

<

>

SmokeSafe D120 has a fire resistance performance to Annex D as documented within the standard achieving a D600A classification (600°C, over 120 minutes) when tested in in accordance with BS EN 1363-1:2012.
Reliability, response time and durability tests were carried out in accordance to Annex B, to determine the durability of the system. The SmokeSafe D120 system is designed to operate to more than 3 000 cycles (the standard only requires 1 000 cycles) at normal ambient temperatures to Category ASB1 and ASB2.

• Shop unit containment
• Escalator containment
• Stairwell containment
• Elevator wells containment
• Smoke reservoir boundaries
• Channelling screens
• Void edge screens
• ​Void edge sealing

Curtain Drop	Single Box Standard Size (WxH)	Double Box Over/Under Size (WxH)
Up to 2.5m	180x180mm	160x320mm
2.5m to 4m	200x200mm	180x360mm
4m to 6.6m	210x240mm	200x400mm

Side Guides:
SmokeSafe D120 is also available with side guides where a high degree of deflection is likely.
Split Drop: 
An optional braking system is available to allow a stage descent during deployment. Partial descent to a predetermined level to permit preliminary escape and initial smoke containment, after delay the barrier descends to full operational position. 
Visual Alert System:
Flashing light and sirens are connected to the control panel and provide a warning when the barrier is about to descend. When the fire alarm is triggered and the fire barrier deploys the beacon will flash and a sounder alert until the signal from the alarm is lost. Please note that when used in isolation the audio visual unit does not stop the fire barrier descending or retract

Free no obligation quote

Contact us for a FREE no obligation quote.

Survey

We will visit your site to take exact measurements before fabrication begins.​

Installation

Quality from fabrication to nationwide installation. Our experienced installers are product certified.​